『3 Factors』Causes Damage to Large Equipment

『3 Factors』Causes Damage to Large Equipment

 

I believe that all company pays great attention to ship large equipment. Large equipment involves expensive pricing, and its transportation cost is much higher than normal. From this article, we provide 3 factors and some tips to transport large equipment.

 

 

I.  3 Factors Affects Shipping Large Equipment

 

a.  Transportation Environment:

● Stacker

● Pallet Jack

● Lift Truck

● General Tilt Standard: 0~30 degrees

 

b.  Transportation Route:

Pay attention to slope and inclination angle

Is there any obstacle?

Window, Door Width, Elevator, Walkway Width and Corner

 

c.  Installation Environment:

● Fixed Indeed

● Level

 

 

II.  Packaging Style

 

In addition to the 3 factors mentioned above, here are the following common packaging styles for equipment packaging:

 

『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment
Wooden Packing Fix on The Pallet Packaging Belt to Fix Carton on Pallet With Ramp

※ You can use a ramp to transport expensive equipment.

 

 

III.  Common Mistakes

 

In the transportation of large equipment, every step and procedure is very crucial. If the handler does not follow the procedure, it may cause serious consequences.

Here are the common mistakes as transporting large equipment:

  •  
  • Transported by untraining individuals or companies
  • Rough or quick loading and unloading
  • Failure to follow standard handling procedures
  • The packaging or fixing method fails to achieve the function of protecting the goods

 

『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment
No Fixed as Lifting Failure to Follow SOP by Pallet Jack Open with Safety Protection Not fixed in the Container

 

 

IV.  The Correct Operating Lifting Platform

 

The 3 steps in the figure below are the correct steps for the operation of the truck lift table:

 

正確的貨車升降台作業程序步驟
3 Steps for the Correct Operating Lifting Platform

 

 

V.  Proper Handling and Suggestions 

 

『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment

 

The following are our suggestions for handling large equipment:

 

● Loaders have professional training and practical experience in product handling

● Inspect Product Appearance

● Check conditions and display of the impact indicator and tilt indicator

● Those who use the designated transport company will not accept subcontracting

● Check whether the lifting platform (if used) has sufficient load capacity

● Use logistics belt and canvas to fix the product on the truck

● There must be enough trained personnel to carry out the final internal delivery on the truck

● Notify customers 24 hours before delivery

 

 

VI.  Symbols or Warning Labels on Packaging

 

『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment
 Center of Gravity This Side Up Fragile & This Side Up Face Up (DO NOT DUMP) Fragile (This Side Up)

 

 

『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment 『3 Factors』Causes Damage to Large Equipment
Tilt Indicator Multiple Angles Tilt Indicator Impact Indicator

 

 

Share

You May Also Like

Request sample

Don’t hesitate, get your own sample right now!

Customization

Feel free to let us know if you have any question

Contact

Feel free to let us know if you have any questions.